Includes everything to build a Filamentalist V3:
| Qty | Part |
| 1 | Ø 5/16 (≈7.95mm) shaft L=70mm |
| 1 | MR688-2RS bearings |
| 4 | MR608-2RS bearings |
| 1 | HF081412 One-Way Bearing |
| 1 | ECAS04 |
| 2 | O-ring |
| 1 | Spring (304,6mmx0.6mmx15mm) |
| 1 | M3xD5xL4 Threaded Heatset insert |
| 1 | M3x30mm SHCS |
| 10 | M3x12mm SHCS |
| 14 | M3x 8mm FHCS |
| 4 | M3x12mm FHCS |
| 1 | M3 Washer |
| 4 | Rubber Band |
| 0.5m | PTFE Tubing (2.5mm ID, 4mm OD) |
Hoss –
The one way bearings fit too tightly around the shafts, this builds up filament slack over time. Nothing a little sanding can’t fix. Other than that, everything’s perfect.