Carbonara CF X Beam

Beams are now in stock, printed inserts are not yet available so these will still show as back order for now!

Carbonara is a high-endurance, high-quality carbon fibre X beam for Voron and Monolith 3D printers using the stock build sizes of 250, 300, and 350.

Key features

• High torsion resistance
• Made with high temperature resin. 110°C short term temperature resistance, good for 90°C chamber.
• Ultra light, up to 58% weight reduction from a standard 2020 aluminium extrusion (before hardware and inserts).
• Smooth 3K carbon strand finish.
• Tested for 800 hours at VERY high speeds, 500-1300mm/s @ 50.000-100.000m/s² and a 80°c chamber.

This project has been made possible by Brazuka in collaboration with the Monolith team.

Included (Size dependant):

Optionally included:

Printed parts printed in PC-PBT-GF. These will be an additional cost, you can print yourself if preferred, please using a filament capable of 110C HDT!

Important information

The printed inserts are a MUST  to ensure maximum performance. Please make sure they are all aligned and facing the same direction.
Hollow spacers aren’t mandatory, they are only used to facilitate installation. For a stock Voron gantry new printed XY-joints are needed that don’t have the small tab that aligns with the slot in a regular extrusion.
STLs for the inserts and Voron XY-joints can be found here on Printables.
BOM for the inserts and mounting can be found here.
This project has been made possible by Brazuka in collaboration with the Monolith team.

Special thanks to

Brazuka: ko-fi
Making the tube and managing the project.

Adeo: Ko-Fi, Github
For the amazing temperature and torsion testing.
(can be found in the Monolith discord)

CloakedWayne: ko-fi, github
For the incredible mounting inserts.